• Less heat and noise in the refrigeration area: The evaporator unit and condenser unit are mounted separately, so heat and noise are relocated outside.
• Usable even with low ceiling height: Compared to ceiling units, less space is required above the cold room for ventilation.
• More space for storage shelves: Compared to wall units, more floor space remains inside for the installation of shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 36.1 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

The split refrigeration unit separates the evaporator and outdoor unit, so that heat and noise from the compressor are directed outside. This supports a quieter working environment and the energy efficiency of the appliance. The flat evaporator for ceiling mounting saves space in the cold room and allows more room for storage. With the integrated digital thermostat, the desired temperature can be set easily and accurately. The flexible installation is also suitable for rooms with low ceilings or limited ventilation.

• ⚠️ An authorised refrigeration technician is required for extending the supplied refrigerant lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, a clearance of 400 mm should be maintained on all sides as well as above and below.
• ⚠️ Due to the IP23 protection rating, installation is recommended indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance are maintained.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.