• Less heat and noise inside: The evaporator unit and condenser unit are installed separately, so that the heat and noise from the condenser unit are directed outside.
• Suitable for low ceiling heights: Compared to ceiling units, less space is required above the cold room for ventilation.
• More storage space in the cold room: Compared to wall units, more space remains inside for the installation of storage shelving.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 11.1 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. By separating the evaporator and outdoor unit, heat and noise from the compressor are directed outside; this ensures a quieter working environment and supports the energy efficiency of the unit. The flat evaporator for ceiling mounting saves space inside the cold room and provides more room for storage. An integrated digital thermostat also allows for easy and precise adjustment of the desired temperature.

• ⚠️ A qualified refrigeration technician is required for the extension of the supplied refrigerant lines as well as for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of space on each side as well as above and below.
• Due to the IP23 protection class, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it as necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.