• Made in Italy: Represents high-quality craftsmanship and durable quality. The product benefits from Italian artisanal skill.
• Single-block structure made of AISI 304 stainless steel: Provides robust stability and easy cleaning. This ensures a long service life and hygienic operation.
• Grease-free labyrinth filters made of 18/10 stainless steel: Ensure efficient grease separation and easy maintenance. This improves air quality and reduces cleaning effort.

Product Overview

The ceiling hood with motor is a high-quality ventilation solution specifically designed for professional use in kitchens and commercial areas. With a width of 1800 mm, it offers efficient extraction of vapours and odours. The external control unit allows easy adjustment of fan speed and lighting, making operation particularly convenient.

Product Details

Manufactured from AISI 304 stainless steel, the hood impresses with its robust and durable construction. The welded design ensures stability and a drip-free, hermetic gutter for collecting fats, which can be easily emptied via drain valves. For optimal hygiene, it features grease-free labyrinth filters made of 18/10 stainless steel. The surface is Scotch-Brite satin-finished, facilitating cleaning. Additionally, the compact structure allows for installation within minutes.

Conclusion and Areas of Application

This ceiling hood is ideal for use in large kitchens, catering establishments, and other commercial environments where reliable and powerful ventilation is required. It impresses with its easy operation, efficient grease separation, and robust workmanship. Equipped with lighting and an external controller, it is a practical and long-lasting solution for all professional kitchen ventilation needs.

• ⚠️ Pipe diameters should always remain consistent or only be reduced following professional planning.
• ⚠️ An incorrect reduction can affect the entire system.

• Modern flame protection filters made of stainless steel can be cleaned in a commercial dishwasher.
• Daily cleaning prevents the filters from burning in and becoming resinous.
• Carefully lift the filters out of the holder, as there may be drops of grease.
• In case of heavy soiling, rinse off coarse grease with hot water.
• Wash the filters in the dishwasher at a minimum of 60–70 °C using a grease-dissolving detergent.
• The filters must be completely dry before being reinserted to prevent mould and bacterial growth.
• For flawless operation, it is recommended to descale the device regularly.
• If a descaler is installed upstream, the cartridge must be regenerated after approximately 1500 - 2000 litres of water flow.
• The maximum flow rate depends on the water hardness.