Commercial Remote Split System Refrigeration Pack - max. for 19.8 m³ - IP rating IP 23 - 1292W

SKU KSC400Temperature: -5 to +8 °C
Rate now

** The picture may slightly differ from the original.

3.789,99 € *
RRP €7,199.99
Delivery time: 5 - 6 Weeks
Free delivery**
Print* net price | gross price incl. 19% VAT.: €4,510.09

** The picture may slightly differ from the original.

GGM Gastro app icon

Save 5% with the GGM Gastro App – exclusive until November 30.

With code APP-05 you save €189.50 on this item.

Open in app
Accessories (9)

Product Advantages

  • Less heat and noise inside: By mounting the evaporator unit and condenser unit separately, heat and noise from the condenser unit are relocated outside.
  • Usable even with low ceiling height: Split units require less space above the cold room for ventilation than ceiling units.
  • More storage space inside the cold room: Compared to wall units, more space remains inside for the installation of storage shelves.

Description

  • Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
  • For a maximum 19.8 m³ cold storage room
  • Temperature range: -5 °C to +8 °C
  • Digital display on the condenser
  • Evaporator as Cu/Al finned heat exchanger
  • Automatic defrost with programmable intervals and duration
  • Condensate drain to the outside
  • Door contact switch & cold room light each with 2.5 m cable

Quiet operation in the cold room

The split refrigeration unit is suitable for walk-in cold rooms in gastronomy, large kitchens, and food businesses. Due to the separate design of the evaporator and outdoor unit, heat and noise from the compressor are directed outside or into a plant room. This ensures a quieter working environment in the kitchen while also supporting the energy efficiency of the unit. The flat evaporator is space-savingly mounted on the ceiling. This leaves more room for food storage and makes the system suitable for rooms with low ceilings or limited ventilation.

Installation & Operation

  • ⚠️ An experienced refrigeration technician is required for the extension of the supplied refrigerant lines as well as for refilling the refrigerant.
  • ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of space on each side as well as above and below.
  • Due to the IP23 protection class, we recommend installation indoors or in a weather-protected, covered outdoor area.

Cleaning & Maintenance

  • We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it as needed. This ensures optimal air circulation and reliable cooling performance.
  • For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.

Technical data

Dimensions

Evaporator dimensions 930 x 402 x 394 mm
Capacitor Dimensions 650 x 390 x 840 mm
Tube length 5.000 mm

Specifications

Outer material Sheet steel
Pipe material Copper
Operation Digital
IP protection class IP23 - Protection against solid objects from 1.25 cm and water spray

Cooling

Max. cooling capacity 19.8 m³
Temperature from: -5 °C
Temperature to: 8 °C
Ambient temperature up to 43 °C
Method of Defrosting Automatic
Refrigerant Type R452a
Refrigerant Quantity 2.090 kg

Connected loads

Power 1.292 kW
Maximum Power Input 3.4 A
Power Connection 400V
Phase 3N~/PE

Shipping

Shipping Method Haulage
Delivery condition Not Mounted
Gross Weight 78 kg
Net Weight 78 kg

Safety and disposal instructions

TUV
Your reliable partner
  • Price/performance: Grade "very good"
  • Customer satisfaction: Grade "very good"
Your Advantages
  • Over 35,000 products in stock and ready to ship
  • Free delivery across Europe on all orders
  • Seen it cheaper elsewhere? Claim our Price Match Promise!
  • Trusted quality backed by 20+ years of market-leading experience
Are you missing product information?Please write to us directly Here >