• More flexibility in installation: By mounting the evaporator unit and condenser unit separately, heat and noise can be diverted outside.
• Suitable for low ceiling heights: Compared to ceiling units, less space above the cold room is required for ventilation.
• More space for storage shelves: Compared to wall units, there is more room inside for the installation of shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 31.1 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Al finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. By separating the evaporator and outdoor unit, heat and noise from the compressor are directed outside, making the working environment more pleasant. This also supports the energy efficiency of the unit. The flat evaporator is space-savingly mounted on the ceiling, thus creating more room for storage. An integrated digital thermostat allows easy and precise adjustment of the desired temperature.

• ⚠️ A trained refrigeration technician is required for extending the supplied refrigerant lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of space on each side as well as above and below.
• Due to the IP23 protection class, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance are maintained.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.