• Less heat and noise in the cold room: By separating the evaporator unit and the condenser unit, the heat and noise from the condenser unit are shifted outside.
• Usable even with low ceiling height: Compared to ceiling units, less space is required above the cold store for ventilation. This facilitates use in rooms with low ceilings.
• More space for storage shelves: Compared to wall units, more space remains inside for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum 16.4 m³ cold room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Flexible cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. By separating the evaporator and outdoor unit, heat and noise are directed outside, making the working environment more pleasant. The flat evaporator for ceiling mounting saves space inside the room, allowing more room for storage. Additionally, the system supports the energy efficiency of the appliance. An integrated digital thermostat facilitates precise adjustment of the desired temperature.

• ⚠️ A qualified refrigeration technician is required for the extension of the supplied refrigerant lines as well as for refilling the refrigerant.
• ⚠️ For adequate ventilation and efficient operation, we recommend leaving 400 mm of space on each side as well as above and below.
• Due to the IP23 protection rating, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and icing and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not covered, to guarantee optimal heat dissipation and efficient operation.