• Less heat and noise inside: By mounting the evaporator unit and condenser unit separately, heat and noise from the condenser unit are displaced to the outside.
• Flexible use with low ceiling height: Compared to ceiling units, split units require less space above the cold room for ventilation.
• More space for storage shelving: Compared to wall units, more room remains inside for the installation of storage shelves.

• Split cooling unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 19.8 m³ cooling chamber
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Al finned heat exchanger
• Automatic defrosting with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

Split cooling units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. Evaporator and outdoor unit are arranged separately, so that heat and noise from the compressor are directed outside or into a technical room. This ensures a more pleasant working environment and simultaneously supports the energy efficiency of the appliance. The flat evaporator is space-savingly mounted on the ceiling, allowing more room for storage. Thanks to flexible installation, the system is also suitable for rooms with low ceilings or limited ventilation. An integrated digital thermostat enables easy and precise adjustment of the desired temperature.

• ⚠️ A qualified refrigeration technician is required for extending the supplied refrigerant lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of clearance on each side as well as above and below.
• Due to the IP23 protection rating, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance are maintained.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.