• Less heat and noise in the cold room: The evaporator unit and condenser unit are installed separately, so heat and noise are displaced outside.
• Suitable for low ceiling heights: Compared to ceiling units, less space above the cold store is required for ventilation.
• More space for storage shelves: Compared to wall units, more area inside remains free for the installation of shelving.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 16.4 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. The separate design directs heat and noise from the compressor outside or into a technical room, which supports a more pleasant and quieter working environment. The flat ceiling-mounted evaporator saves space in the cold room and allows more room for storage. Additionally, the system is suitable for rooms with low ceilings or limited ventilation. With the integrated digital thermostat, the desired temperature can be easily and precisely set, making daily operations easier.

• ⚠️ A qualified refrigeration technician is required for the extension of the supplied refrigerant lines as well as for the replenishment of the refrigerant.
• ⚠️ To ensure sufficient ventilation and efficient operation, a clearance of 400 mm should be left on the sides as well as above and below.
• Due to the IP 23 protection class, installation is recommended indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance are maintained.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.