• Less heat and noise in the cold room: By separating the evaporator unit and condenser unit, heat and noise are diverted outside.
• Flexible with low ceiling height: Compared to ceiling units, the split unit requires less space above the cold store for ventilation.
• More storage space inside: Compared to wall units, more space remains available for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum 6 m³ cold room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrosting with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens and food businesses. By separating the evaporator and outdoor unit, heat and noise from the compressor are directed outside or into a plant room. This creates a more pleasant working environment and simultaneously supports the energy efficiency of the unit. The flat evaporator is mounted space-saving on the ceiling, leaving as much room as possible for storage. Furthermore, the system can be flexibly installed and used in rooms with low ceilings or limited ventilation. An integrated digital thermostat allows for easy and precise adjustment of the desired temperature.

• ⚠️ A qualified refrigeration technician is required for extending the supplied refrigerant lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of space on the sides as well as above and below.
• Due to the IP23 protection class, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it as needed. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not obstructed, to guarantee optimal heat dissipation and efficient operation.