• Heat and noise displaced to the outside: By mounting the evaporator unit and condenser unit separately, the heat and noise from the condenser unit are relocated outside.
• Usable even with low ceiling height: Compared to ceiling units, less space above the cold room is required for ventilation. This facilitates use in rooms with low ceilings.
• More space for storage shelves: Compared to wall units, more room remains inside for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum 36.1 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Flexible cooling for cold rooms

The split refrigeration unit is designed for walk-in cold rooms in gastronomy, large kitchens, and food businesses. By separating the evaporator and outdoor unit, heat and noise from the compressor are directed outside, making the working environment more pleasant. The flat evaporator for ceiling mounting saves space inside the cold room and allows more room for storage. Additionally, the system supports the energy efficiency of the unit. An integrated digital thermostat facilitates precise adjustment of the desired temperature.

• ⚠️ An experienced refrigeration technician is required for extending the supplied refrigeration lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, we recommend leaving 400 mm of space on each side, as well as above and below.
• ⚠️ Due to the IP23 protection class, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and frost build-up and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.