• Less heat and noise inside: By mounting the evaporator unit and condenser unit separately, heat and noise from the condenser unit are shifted outside.
• Flexible for use with low ceiling heights: Compared to ceiling units, the split unit requires less space above the cold room for ventilation.
• More storage space inside the cold room: Compared to wall units, more space remains inside for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum 31.1 m³ cold room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Al finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet cooling for chambers

The split refrigeration unit separates the evaporator and outdoor unit, so that heat and noise from the compressor are directed outside or into a plant room. The flat evaporator is space-savingly mounted on the ceiling, thereby allowing more room for storage. An integrated digital thermostat facilitates precise adjustment of the desired temperature. Additionally, the system supports the energy efficiency of the appliance and is also suitable for rooms with low ceilings or limited ventilation.

• ⚠️ A qualified refrigeration technician is required for extending the supplied refrigerant lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, a clearance of 400 mm should be left on the sides, as well as above and below.
• Due to the IP23 protection rating, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and icing and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not covered, to guarantee optimal heat dissipation and efficient operation.