• Heat and noise displaced to the outside: The separate installation of the evaporator unit and condenser unit directs heat and noise from the condenser unit outside.
• Usable even with low ceiling height: Compared to ceiling units, less space above the cold room is required for ventilation.
• More space for storage shelves: Compared to wall units, more space remains inside for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum 23.9 m³ cold room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Al finned heat exchanger
• Automatic defrost with programmable intervals and duration
• Condensate drainage to the outside
• Door contact switch & cold room light each with 2.5 m cable

Flexible cooling for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, large kitchens, and food businesses. Due to the separate construction of the evaporator and outdoor unit, heat and noise from the compressor are directed outside; this supports a quieter working environment and the energy efficiency of the appliance. The flat evaporator on the ceiling saves space in the cold room, while the system can also be flexibly installed in cases of low ceilings or limited ventilation. An integrated digital thermostat for precise temperature control facilitates operation and helps to set the desired temperature accurately.

• ⚠️ A qualified refrigeration technician is required for extending the supplied refrigeration lines and for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, a clearance of 400 mm should be left on the sides as well as above and below.
• Due to the protection class IP23, we recommend installation indoors or in a weather-protected, covered outdoor area.

• We recommend regularly checking the evaporator for dirt and icing and cleaning it carefully if necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not blocked, to guarantee optimal heat dissipation and efficient operation.