• Heat and noise displaced to the outside: By separately installing the evaporator unit and the condenser unit, heat and noise from the condenser unit are relocated outside.
• Usable even with low ceiling height: Compared to ceiling units, the split unit requires less space above the cold room for ventilation.
• More space for storage shelves: Compared to wall units, more wall space remains inside for the installation of storage shelves.

• Split refrigeration unit consisting of 1 outdoor unit & 1 indoor unit
• For a maximum of 16.4 m³ cold storage room
• Temperature range: -5 °C to +8 °C
• Digital display on the condenser
• Evaporator as Cu/Aluminium finned heat exchanger
• Automatic defrosting with programmable intervals and duration
• Condensate drain to the outside
• Door contact switch & cold room light each with 2.5 m cable

Quiet refrigeration technology for cold rooms

Split refrigeration units are a practical solution for walk-in cold rooms in gastronomy, commercial kitchens and food businesses. By separating the evaporator and outdoor unit, heat and noise from the compressor are directed outside, making the working environment quieter. At the same time, the system supports the energy efficiency of the appliance. The flat evaporator on the ceiling saves space in the cold room, and the flexible installation is also suitable for rooms with low ceilings or limited ventilation. An integrated digital thermostat also allows for easy and precise temperature control.

• ⚠️ A qualified refrigeration technician is required for extending the supplied refrigerant lines as well as for refilling the refrigerant.
• ⚠️ To ensure adequate ventilation and efficient operation, a clearance of 400 mm should be maintained on all sides, as well as above and below.
• Due to the IP23 protection rating, installation indoors or in a weather-protected, covered outdoor area is recommended.

• We recommend regularly checking the evaporator for dirt and icing and carefully cleaning it if necessary. This ensures optimal air circulation and reliable cooling performance.
• For the condenser unit, care should be taken to ensure that the ventilation slots are not covered, to guarantee optimal heat dissipation and efficient operation.